Product characteristics

Light weight and high strength

Plate absolute dry capacity 450~650kg/m3, equal to gray brick 1/3, clay brick 1/4, concrete 1/5, and wood, lighter than water, can effectively reduce the building's own weight, reduce the wall load 50~60%, the total building weight reduce 20~30%, reduce the ratio of steel bar 1~2 level, Reduce the amount of steel reinforcement 2~4kg/m2, than the ordinary brick concrete structure of the building weight reduced by more than 40%, reduce the cost of structure and foundation construction, equipped with steel, high strength, can withstand greater wind load and has good impact resistance.

Flame retardant and refractory

The raw materials and products of the board are inorganic silicate non-combustible materials, which belong to class A fireproof materials, and do not produce toxic gases at high temperatures. The fire resistance limit of 100m thick wall panels is greater than 4 hours. When the temperature is below 600 ° C, the compressive strength of the air-enlivened concrete increases slightly. Because the product has high thermal resistance coefficient, good volumetric thermal stability, slow thermal migration, good fire resistance and effective prevention of fire spread, aerated concrete products are widely used in firewalls and building internal and external partition walls.

Heat preservation and insulation

The microstructure of the board is composed of countless non-connected uniform tiny pores, so that it has excellent thermal insulation performance, its thermal insulation performance is 10 times that of ordinary concrete, 7 times that of clay brick, 6 times that of glass, usually the use of aerated sheet is relatively thin to achieve the thermal insulation effect of conventional wall materials, is an ideal building insulation material.

Green energy saving

The raw materials of the board are natural inorganic materials, non-radioactive, will not produce toxic gases at high temperatures, the use of health, safety, is the green building materials vigorously promoted by the state, consumes less natural minerals and energy, makes full use of industrial waste, and is committed to achieving sustainable development on the basis of ecological environmental protection and energy saving. It has the characteristics of energy saving, environmental protection and high-tech, and can well reduce the energy consumption operation cost of heating and air conditioning used in houses. A single material with 200mm thickness can achieve 65% energy saving, and a single material with 300mm thickness can achieve 75% energy saving.

Soundproof privacy

From its aerated concrete porosity structure, the board can be seen that because the internal structure of aerated concrete is like bread, a large number of closed pores are evenly distributed, so it has the dual performance of sound absorption and sound insulation that general building materials do not have. Different levels of products, different finishes and thickness of the wall weight sound insulation amount can reach 40-60dB, thus isolating outdoor noise interference. It also ensures a mellow and pleasant sound environment and provides a quiet and comfortable living environment.

Convenient construction

The board can effectively improve the use area of the building, reduce the basic cost, without increasing the comprehensive cost of the building at the same time, can greatly reduce the building energy consumption, improve the comfort of the building, the board in the factory prefabricated, without support mold maintenance, on-site assembly, the longest can be 6 meters, greatly improve the construction speed, with good processability. It is easy to saw, cut, planing and drilling, easy to process on site, fast construction speed, and no need to set up structural columns and ring beams, which can greatly improve the construction speed.